Hacksaw's Frame Repair Pictures

[Hacksaw]

On August 1st, 2008, I brought my Metro over to Chuck the Welder to have my frame repaired on both sides.
Chuck was a skilled trades welder for Buick for over 30 years and is now retired. He still works, but not for "the Man" anymore...Chuck works for himself...and for beer.

This is Chuck.

000 This is Chuck the Welder.JPG (84.45 KiB) Viewed 3622 times

[Hacksaw]

This is a picture of me and my 1995 Metro.

Me and my Metro.JPG (84.85 KiB) Viewed 3592 times

[Hacksaw]

Since pictures speak a thousand words, here's the pictures...

001.JPG (92.65 KiB) Viewed 3589 times

002.JPG (85.04 KiB) Viewed 3566 times

003.JPG (91.76 KiB) Viewed 3560 times

[Hacksaw]

004.JPG (82.65 KiB) Viewed 3540 times

005.JPG (94.73 KiB) Viewed 3546 times

006.JPG (91.01 KiB) Viewed 3533 times

[Hacksaw]

007.JPG (87.18 KiB) Viewed 3523 times

008.JPG (85.2 KiB) Viewed 3512 times

009.JPG (94.39 KiB) Viewed 3511 times

[Hacksaw]

010.JPG (91.43 KiB) Viewed 3518 times

011.JPG (92.02 KiB) Viewed 3503 times

012.JPG (91.42 KiB) Viewed 3496 times

[Hacksaw]

013.JPG (94.62 KiB) Viewed 3490 times

014.JPG (92.32 KiB) Viewed 3484 times

015.JPG (87.49 KiB) Viewed 3474 times

[Hacksaw]

016.JPG (93.32 KiB) Viewed 3469 times

017.JPG (94.5 KiB) Viewed 3463 times

018.JPG (93.36 KiB) Viewed 3485 times

[Hacksaw]

019.JPG (92.12 KiB) Viewed 3473 times

020.JPG (91.92 KiB) Viewed 3473 times

021.JPG (92.1 KiB) Viewed 3480 times

[Hacksaw]

022.JPG (93.26 KiB) Viewed 3479 times

023.JPG (84.6 KiB) Viewed 3471 times

024.JPG (92.12 KiB) Viewed 3456 times

[Hacksaw]

025.JPG (88.43 KiB) Viewed 3457 times

026.JPG (93.06 KiB) Viewed 3441 times

027.JPG (92.48 KiB) Viewed 3439 times

[Hacksaw]

028.JPG (93.45 KiB) Viewed 3436 times

029.JPG (93.21 KiB) Viewed 3425 times

030.JPG (92.72 KiB) Viewed 3427 times

[Hacksaw]

031.JPG (93.85 KiB) Viewed 3421 times

Thank you Chuck, for a job well done...say cheese!

032 Take a bow Chuck, for a job well done.JPG (83.73 KiB) Viewed 3416 times

[demonchild]

ooo

i just had the same problem but mine is so bad it cracked and now tire is hitting back of wheel well

how far away from flint is this guy and how much beer lool

i dont know if i should fix it like he did yours or get the whole thing from a junk yard and have it welded to the firewall / body where old one is as the area that the frame for the control arm mounts is rotted too so im not sure yet how things will go

here is where mine cracked...yes i know this is the right side of your car but it looks almost as bad as my left side. the dotted red line is where it cracked and the arrow shows the direction the control arm moved..

[jeremyd]

Found a car at the wreckers that had been sprayed yearly or something. There was no rust on the sub-frame horn brackets. Cut them out for 55 bucks a piece and replaced mine for free. Your welder left a lot of rust. Thats fine unless you're planning on using the car for more than a year or two.